41
1. Enter your password with the JogDial while listening to
the number of beeps because the password is hidden
on the LCD or monitor. The rules are as follows:
• Each password has an invisible leading "0".
• 2 beeps stand for "2" when turning the JogDial clock-
wise.
• 2 beeps stand for "0" when turning the JogDial counter-
clockwise.
• Turning the JogDial further counter-clockwise beyond
"0", or clockwise from "9" will have no effect.
2. Press the JogDial to move the cursor to the next digit.
3. Repeat steps 1 and 2 for the remaining digits.
The recorder allows access to the front panel controls if
the correct password is entered and a button operation
takes place within 5 minutes of password entry.
■ Lock/Unlock Buttons
● Password Verification
The password prompt is displayed on the LCD and on the
monitor when a locked button is pressed.
Try again when Password Error appears on the LCD, or
press the LCD button to quit password verification.
DISPLAY SELECT
LCD CONTRAST
DISPLAY SELECT
LCD CONTRAST
• • • • •
● Enabling Button Lock
DISPLAY SELECT
STOP PLAY REC
PUSH– PAUSE
SET
ALARM SEARCH STEP REW/FF
PLAY MODE SELECT
//
/
/
SETU/ESC
LCD CONTRAST
Digital Disk Recorder WJ-HD
1, 2
DISPLAY SELECT
LCD CONTRAST
DISPLAY SELECT
LCD CONTRAST
DISPLAY SELECT
LCD CONTRAST
1. Press the LCD button downward to display [Key Lock]
on the LCD.
2. Press the LCD button to the right or left to display
“PUSH [DISPLAY]” on the LCD, then press the LCD
button center.
This enables button lock mode.
Note: Set PASSWORD LOCK to OFF if you do not want
the recorder to revert to button lock mode when no
operation takes place within 5 minutes. See page
22 for details on PASSWORD LOCK.
