
43
SPECIFICATIONS
General
Required Power: 120 V AC 60 Hz
Power Consumption: 24 W
Operating Temperature: +5 °C to +45 °C (41 °F to 113 °F)
Dimensions: 420 mm (W) x 44 mm (H) x 350 mm (D), excluding rubber feet
16-9/16” x 1-3/4” x 13-13/16”
Weight: 5.2 kg (2.4 lbs)
Input
Video Input: Composite video or data multiplexed, 1 V[p-p], 75 Ω auto-termination, BNC
Audio Input: –10 dBV, 10 kΩ, unbalanced, RCA pinjack
Alarm Input: Non-voltage make contact, 100 ms or longer, terminal
Alarm Reset Input: Non-voltage make contact, 100 ms or longer, terminal
Time Adjust Input: Non-voltage make contact, 100 ms or longer, terminal
Series Recording Input: Non-voltage make contact, 100 ms or longer, terminal
Alarm Recall Input: Non-voltage make contact, 100 ms or longer, terminal
Remote Control Input: REC, PLAY, STOP (SETUP), REW/FF, STEP, ALARM SEARCH, JOG-RIGHT,
JOG-LEFT, JOG-CLICK (EXT REC): Non-voltage make contact, 100 ms or longer,
terminal
Output
Monitor Output: Composite video, 1 V[p-p], 75 Ω, BNC
Video Output: Looped through, BNC
Audio Output: –10 dBV, 600 Ω, unbalanced, RCA pinjack
Camera Switching Output: Open-collector, MAX 12 V DC 100 mA, RCA pinjack
Alarm Output: Low-active (open-collector, MAX 24 V DC 100 mA)/High-active (12 V DC, 220 Ω)
switchable, terminal
Alarm Recover Output: Low-active (open-collector, MAX 24 V DC 100 mA)/hi-active (5 V DC, 220 Ω)
switchable, terminal
Recording Status Output: Open-collector, MAX 24 V DC 100 mA, terminal
Playback Status Output: Open-collector, MAX 24 V DC 100 mA, terminal
Time Adjust Output: Open-collector, MAX 24 V DC 100 mA, terminal
Disk End Status Output: Open-collector, MAX 24 V DC 100 mA, terminal
Auto OFF Output: Open-collector, MAX 24 V DC 100 mA, terminal
Series Recording Output: Open-collector, MAX 24 V DC 100 mA, terminal
Serial Interface
RS-232C: 9-pin D-Sub
RS-485: PS
•
Data protocol, Modular-6
Alarm Function
Alarm Buzzer: ON/OFF
Alarm Reset: Auto reset/manual reset
Alarm Suspension: ON/OFF
Button Lock Buzzer: ON/OFF
Standard Accessories
Rack Mounting Bracket: 2 pcs
Fixing Screw (M3x10): 6 pcs
Dimensions and weight are approximate.
Specifications are subject to change without notice.