195
Shooting Settings
6
6
When a spot area is selected, use
the four-way controller (2345)
to move the frame to the position
you want to measure.
7
Press the 4 button.
The white balance fine-tuning screen
appears when measuring is completed.
Adjust the white balance if necessary.
(p.193)
8
Press the 4 button.
The camera returns to the [White Balance] screen.
9
Press the 4 button.
The camera is ready to take a picture.
• No image is recorded when the shutter release button is pressed to adjust
the white balance.
• [The operation could not be completed correctly] appears when measuring is
unsuccessful. Press the 4 button while displayed to return to the screen
for remeasuring.
• If the picture is extremely overexposed or underexposed, white balance may
not be adjusted. In this case, adjust appropriate exposure first and then
adjust the white balance.
• When the mode dial is set to C (Movie), the white balance cannot be
measured. Adjust the white balance in any exposure mode other than
C (Movie) before recording a movie.
MENU
Cancel OK
OK
Check
Manual
White Balance
Adjust
MENU
SHUTTER
GG
BBA
A
MM
±0 ±0
±0
AE.L
Cancel OK
OK
