32
15 Troubleshooting
If GoGear Vibe is not working properly or the
display freezes, you can reset it without losing
data:
How do I reset GoGear Vibe?
Insert a pen tip or other object into the •
reset hole located at the left hand side of
GoGear Vibe. Hold until the player shuts
down.
If the reset option is unsuccessful, follow •
the steps how to recover GoGear Vibe
with the Philips Device Manager:
1 On your computer, select Start >
Programs > Philips Digital Audio Player
> Vibe Device Manager > Philips Device
Manager to launch the Philips Device
Manager.
2 Turn off GoGear Vibe before you
continue.
3 Press and hold the volume button
while you connect GoGear Vibe to your
computer.
4 Keep holding the key until the Philips
Device Manager acknowledges GoGear
Vibe and enters the recovery mode.
5 On the computer, click the Repair
button and follow the instructions of the
Philips Device Manager to complete the
recovery process.
6 When the recovery is completed,
disconnect GoGear Vibe from your
computer.
7 Restart GoGear Vibe.
EN
