Chapter 12: Command Line Interface (CLI)
The KSX II now has the basic configuration and can be accessed
remotely via SSH, GUI, or locally using the local serial port. The
administrator needs to configure the users and groups, services,
security, and serial ports to which the serial targets are attached to the
KSX II.
CLI Prompts
The Command Line Interface prompt indicates the current command
level. The root portion of the prompt is the login name. For a direct admin
serial port connection with a terminal emulation application, Admin Port
is the root portion of a command.
For TELNET/SSH, admin is the root portion of the command:
admin > config > network >
0
CLI Commands
The table below lists and describes all available CLI commands.
Port configuration command
Switch to the Configuration menu.
Switch to diagnostic commands menu.
Display an overview of the CLI syntax.
Display the current session's command line history.
Configure the KSX II network interface.
Logout of the current CLI session.
Display or change a device name and/or the
hostname.
Return to previous command