Chapter 2: Installation and Configuration
Valid Special Characters for Target Names
Specifying Power Supply Autodetection
The KX II provides dual power supplies and can automatically detect and
provide notification regarding the status of these power supplies. Proper
configuration ensures that the KX II sends the appropriate notifications
should a power supply fail.
The Power Supply Setup page is configured to automatically detect both
power supplies when two power supplies are used. If only one power
supply is used in your configuration, you can disable automatic detection
from the Power Supply Setup page.
To enable automatic detection for the power supplies in use:
1. Choose Device Settings > Power Supply Setup. The Power Supply
Setup page opens.
2. If you are plugging power input into power supply number one
(left-most power supply at the back of the device), select the
Powerln1 Auto Detect option.
