76 A60 Dual Function Display
5. When you arrive at the target waypoint an alarm sounds and a warning mes-
sage is displayed. To de-activate this alarm, press any key.
6. To set the cross track error (XTE) to zero and move the origin to the actual ves-
sel position press RESTART XTE. The BOD and BVD lines are now aligned.
7. To stop navigating to the waypoint, press STOP GOTO. The BOD and BVD lines
are removed.
Note:
For more information on navigating with Waypoints, please refer Chapter 3: Work-
ing with Waypoints.
1.0nm North-Up (Relative Motion)
Csr Pos N 25°18.160 W 080°19.397
076°T
5.8nm
D9843-1
WPT 0005
RESTART
XTE
...
STOP GOTO
RESTART
XTE
...
STOP GOTO
Bearing from Origin to Destination:
dashed line marking original
course of GOTO (unchanged)
Bearing from Vessel to Destination:
dashed (blue) line marking actual
current course of GOTO (updated)
Target Waypoint
81295.book Page 76 Wednesday, December 20, 2006 2:48 PM
