A SERVICE OF

logo

Chapter 4: Using the Chartplotter 89
4. Use the trackpad (right) to move control from the left (Waypoint) column to
the right (New Route) column.
5. Use the trackpad (up) to move the highlight immediately below where you
want the new waypoint inserted. The route follows the waypoints listed in this
column in order, from top to bottom.
6. Move control back to the left column and select the waypoint that is to be
added to your route.
7. Press INSERT WAYPOINT. The waypoint is added.
Make Route
D9861-1
WPT 0008
WPT 0009
WPT 0010
WPT 0011
WPT 0012
WPT 0013
WPT 0008
WPT 0009
WPT 0011
N 25 34.521
W 079 01.755
Make Route
Waypoints in this route
All existing waypoints
Trackpad controls
highlighted field
Make Route
D9862-1
WPT 0008
WPT 0009
WPT 0010
WPT 0011
WPT 0012
WPT 0013
WPT 0008
WPT 0009
WPT 0011
N 25 34.521
W 079 01.755
N 25 33.055
W 079 56.151
Make Route
ENTER
ENTER
then
Make Route
D9863-1
WPT 0008
WPT 0009
WPT 0010
WPT 0011
WPT 0012
WPT 0013
WPT 0008
WPT 0009
WPT 0011
N 25 28.205
W 079 39.759
N 25 33.055
W 079 56.151
Make Route
ENTER
ENTER
then
81295.book Page 89 Wednesday, December 20, 2006 2:48 PM