A SERVICE OF

logo

Open as PDF
next previous
Selecting a shnder preset
From the shnder main screen:
1. Press the appropriate softkey to select from:
• PRESET 1 SINGLE,
• PRESET 2 DUAL,
• PRESET 3 SHALLOW or
• PRESET 4 DEEP
After a few moments, the shnder display will change to the new
mode. This is indicated in the top left-hand corner of the status bar.
12.4 Fishnder display modes
Selecting a shnder display mode
When a shnder preset is selected, its softkey label changes to
ADJUST. Pressing this softkey allows you to congure the display
mode settings to suit your requirements. (Changes to the display
mode are saved with the preset at power-off.)
From the shnder main screen:
1. Press the appropriate ADJUST... softkey.
2. With dual frequency screens select FREQ1 or FREQ2 to select
which frequency display you wish to change.
3. Press the SELECT VIEW softkey.
4. Use the trackpad up/down to select the required display mode:
• None,
• Zoom,
• Bottom Lock or
• A-Scope
5. Press OK when complete.
Fishnder zoom mode
The zoom display mode magnies a region of the shnder screen
to display more detail.
This zoom option enables you to:
• Replace the standard shnder image with the zoomed image,
or display the zoomed image alongside the standard shnder
image.
• Set the zoom factor to a predened level, or adjust it manually.
154 C-Series Widescreen user reference