A SERVICE OF

logo

Regency
®
E33S-1 Sunrise Gas Insert
26
MAINTENANCE
FAN REPLACEMENT
6) Remove the back shield by undoing the 2 screws shown.
9) Remove the base cover by lifting up from the back and maneover
out.
7) Remove the burner by undoing the 2 screws shown. Carefully lift the
burner up and out ensuring not to spill glass crystals.
8) Carefully set aside the burner and glass crystals.
Base Cover
MAINTENANCE
1) Turn the unit off and allow it to cool down to room temperature.
2) Disconnect the power source and turn off the gas supply to the
insert.
3) Open the bottom louver.
5) Remove the glass door.
a) Remove the 2 screws shown below at the bottom of the glass
door.
b) Swing the door out 45
o
from the bottom and lift up and
out.
4) Remove the door frame by lifting out from the bottom and lift up off
the glass door.
Door Frame
Glass Door
Back Shield
Burner