A SERVICE OF

logo

11
10. Install the bottom lag bolt
13
. Tighten both lag bolts
13
only until they are pulled firmly against the arm assembly/wall plate
11
.
NOTE: Hold the arm assembly/wall plate
11
in place when tightening the first lag bolt
13
to keep the plate from shifting out of place.
CAUTION: Improper use could reduce the holding power of the lag bolts
13
. DO NOT over-tighten the lag bolts.
11. Install the covers on arm assembly/wall plate
11
.
Go to STEP 3 on PAGE 15.
10
Cover
11
Cover
11
13
11