A SERVICE OF

logo

Assembly
Parts
• Main Unit (from Step 4)
• #12 - Right Leg (Qty. 1)
• #13 - Left Leg (Qty. 1)
Hardware
• #27 - M8 Lock Washer - Black (Qty. 2)
• #28 - M8 Wide Flat Washer (Qty. 2)
• #31 - M8x20 Hex Head Bolt (Qty. 2)
• #32 - Round Cover (Qty. 2)
Tools
• Hex Key
Do steps 5-1 and 5-2 on one side and then again
on the other side.
5-1 Install the Right Leg to the Main Unit with the hardware
shown. Make sure that the upright pivot (B) is closer to
the center of the machine. Make sure the wheels on
each leg align correctly in the Rails.
5-2 Put a Round Cover over the head of each screw.
Step 5: Install Legs
13
12
32
28
27
31
B
Assembly Manual
12