A SERVICE OF

logo

30
25
24
10
9
Assembly
Parts
• Main Unit (from Step 7)
• #9 - Upper Left Handlebar (Qty. 1)
• #10 - Upper Right Handlebar (Qty. 1)
Hardware
• #24 - M8 Flat Washer (Qty. 8)
• #25 - M8 Lock Washer (Qty. 8)
• #30 - M8x20 Hex Screw (Qty. 8)
Tools
• Hex Key
Do steps 8-1 thru 8-2 on one side and then again
on the other side.
8-1 Put the Upper Right Handlebar into the Lower Right
Handlebar (Figure 8). Make sure that the Upper
Handlebar curves toward the back of the machine
(Figure 8A).
8-2 Attach with the hardware shown.
Step 8: Install Moving Handlebars
Figure 8a
Figure 8
Assembly Manual
15