A SERVICE OF

logo

Open as PDF
next previous
5
Know Your Ash Vacuum
Due to modern mass production techniques and product testing, it is unlikely that your power tool is faulty or that a part is
missing. If you nd anything wrong with your unit, do not operate the tool until the parts have been replaced or the fault has been
rectied. Failure to do so could result in serious personal injury. This ash vacuum cleaner is tted with a stable metal container
with a cover. The vacuum set comprises a exible metal suction hose and an aluminum suction tube. A safety stop prevents the
equipment from operating without a properly installed lter. The following diagram outlines the function of the operating parts.
Fig. 1
1 2 3 4 5 6
11
17
16
20
18
15
7
8
9
10
14
19
13
12
1. Mains cable
2. Accessory holder
3. Inspection window
blockage indicator
4. Retaining bracket
5. Container lid
6. On/O switch
7. Hose connection
8. Seal clips
9. Carry handle
10. Metal container
11. Metal suction hose
12. Suction tube
13. Pleated lter
14. Wire lter basket
15. Safety stop switch
16. Metal retainer clips (3)
17. Air lter
18. Filter housing
19. Wire lter basket tabs
20. Pre-lter
Technical Data
Rated Voltage 120 V ~ 60 Hz
Power 4 amp
Power Consumption 500 W
Container Capacity 4.8 gallons (18 l)
Suction Hose Length 3.9 ft (1.2 m)
Suction Tube Length 11.8 in. (30 cm)
Cable Length 8.2 ft (2.5 m)
Weight 8.8 lbs (4 kg)