6
Delivery Contents
Unpack the equipment and check that all of the following parts
are present:
• Container lid
• Metal container
• Pre-lter
• Flexible metal suction hose
• Aluminum suction tube
• Pleated lter (already mounted)
• Wire lter basket (already mounted)
Dispose of the packaging material in a proper manner.
Assembly
m
WARNING! Disconnect the plug before carrying out
any work on the equipment. Failure to do so can result in
electric shock.
Fitting the Pre-Filter
NOTE: The coarse-dust pre-lter is made of a specially
designed glass fabric cloth that eectively lters approximately
95% of coarse-dust particles. Installng the pre-lter correctly
will reduce the cleaning of the pleated lter and prolong the
pleated lter lifetime.
1. Check that the pleated lter and the wire lter basket are
securely mounted in the correct position (Fig. 2).
2. Insert the pre-lter into the ash vacuum metal container,
aligning the PVC edge of the lter with the rim of the
container (Figs. 3 & 4).
3. Place the container lid on the metal container and lock it
using the seal clips (Fig. 5).
Fig. 2
Pre-lter
Fig. 3
Fig. 4
Pre-lter
PVC edge
Fig. 5
