20
Names and Functions of Parts
Chapter 1 Overview
• To cue up to point A or B:
F Tape transport control section
a REW (rewind) button
When you press this button, it lights and the tape starts
rewinding.
When the AUTO EE SELECT >F. FWD/REW menu item
(see page 74) is set to PB, the picture appears on the
monitor during rewind.
b PLAY button
When you press this button, it lights and playback begins.
If you press this button during recording or editing, the
recording or editing operation is stopped and this unit
enters playback mode.
c F FWD (fast forward) button
When you press this button, it lights and the tape is fast
forwarded.
When the AUTO EE SELECT >F. FWD/REW menu item
(see page 74) is set to PB, the picture appears on the
monitor during fast forward.
d STOP button
Press this button to stop the current tape transport
operation.
e REC (record) button
When you press this button while holding down the PLAY
button, it lights and recording begins.
f Servo lock indicator
When the drum servo and capstan servo are locked, this
button lights.
Display the value of (point B
timecode) - (point A timecode)
Press the </A and ,/B
buttons at the same time.
Timecode display Operation to carry out
Cueing up Operation to carry out
Cues up to point B Hold down the ,/B button and press
the F FWD button or REW button.
Cues up to point A Hold down the </A button and press
the F FWD button or REW button.
REW PLAY F FWD
RECSTOP
1 REW button
2 PLAY button
3 F FWD button
4 STOP button
5 REC button
6 Servo lock indicator
