Chapter 2 Managing RAS Features and System Firmware 21
Controlling the Locator LED
You control the Locator LED from the sc> prompt or by the Locator button on the
front of the server module.
▼ To Turn On the Locator LED From the ALOM System
Controller Command Prompt
● Type:
▼ To Turn Off the Locator LED From the ALOM System
Controller Command Prompt
● Type:
Standby blink Repeating
sequence
consisting of a
brief (0.1 sec.)
on flash
followed by a
long off period
(2.9 sec.)
The system is running at a minimum level and is
ready to be quickly revived to full function (for
example, the System Activity LED).
Steady on Steady state Status normal. System or component functioning with
no service actions required.
Slow blink A transitory (temporary) event is taking place for
which direct proportional feedback is not needed or
not feasible.
sc> setlocator on
sc> setlocator off
TABLE 2-2 LED Behaviors With Assigned Meanings (Continued)
Color Behavior Definition Description
