10
AFTER USING YOUR RADIO
Set the radio to Standby.•
Switch the unit o at the mains and unplug it if you are •
leaving it unattended for a long period (holidays etc).
CARE AND CLEANING
All care and cleaning operations should be carried out with
the unit unplugged from the mains power.
Occasionally wipe the cabinet with a lint free duster. Never
clean the unit with liquids or solvents.
SPECIFICATIONS
Supply voltage: ....................5 V
, 1 A, 5 W
AC adaptor mains voltage: ...100-240 V~, 50/60 Hz, 0.18 A
AC adaptor output ................5 V
, 1 A
Power consumption: ............5 W
Output power .......................2.5 W rms
DAB: .....................................174.928-239.2 MHz
FM: .......................................87.5-108 MHz
Net Weight: ..........................568 g
Class II construction double insulated.
This product must not be connected to earth.
CARE AND MAINTENANCE
WARRANTY
SPECIFICATIONS
Your Tesco appliance is covered by a warranty for 12 months
from the date of purchase. If a fault develops during this
period, please contact the TESCO electrical help line on 0845
456 6767. Please have your original purchase receipt with
you when you call. This warranty in no way aects your
consumer rights.
UK: Waste electrical products /batteries should
not be disposed of with household waste.
Separate disposal facilities exist, for your
nearest facilities. See www.recycle-more.co.uk
or in-store for details.
ROI: Produced after 13th August 2005. Waste
electrical products/batteries should not be
disposed of with household waste. Please
recycle where facilities exist. Check with your
Local Authority or retailer for recycling advice.
SYSTEM RESET
DAB is a terrestrial system and frequencies in dierent areas
vary. If you move the radio to another part of the country,
performing a Full Scan may not be enough to re-program the
radio. In this case you may need to reset the radio.
To restore the factory settings:
Set the radio to ‘FM’ mode.•
Press and • hold the DISPLAY button until the display
shows ‘System Reset’.
Press the • SELECT button to conrm reset.
After reset all settings are returned to the factory defaults
and any stored presets are erased.
When the DAB band is next tuned a scan will take place.
HEADPHONES
There is a headphone output socket on the back panel of the
unit. If headphones are connected to this socket for private
listening, the speaker will cut out automatically.
To avoid possible damage to your hearing, do not listen to
music at high levels through headphones.
