8
DAB SCANNING
When rst used, your radio scanned the DAB band for
available stations. The station services found were then
stored in your radio’s memory.
You can re-scan the band at any time if you move to a dierent
area or just to refresh the stored list of available stations.
There are two types of scan available - Quick Scan to scan the
local bands in your region or Full Scan to scan all available
bands.
TO START A SCAN
Switch on the radio and select the DAB band.•
Press the • SCAN button briey to start a Quick Scan or
press and hold the SCAN button to start a Full Scan.
The scan will start after a short delay.
SLEEP MODE
THE SLEEP FUNCTION
The Sleep function allows you to program your radio to switch
itself o after a set period of 90, 60, 30 or 10 minutes.
To activate the Sleep function:
Press the • SLEEP button.
The display will show Sleep 90 mins.
Now press the • SLEEP button repeatedly until your
required sleep time appears on the display.
After a few seconds the Sleep display will disappear and ‘SLEEP’
will appear on the display.
Your radio will continue to play, then will set to Standby
when the sleep time expires.
To cancel the Sleep function once set:
Press the • SLEEP button once during Sleep mode.
The display will show ‘Sleep o’.
A bargraph shows scan progress. When the scan is completed,
the number of services found is displayed.
MANUAL DAB TUNING
It is also possible to tune the DAB band manually. Manual
tuning is not recommended in normal listening.
TO TUNE MANUALLY
Press and hold the • DISPLAY button
Manual Tune is displayed.
Press the • SELECT button.
Press the • ] or [ button to step through the multiplex
channels.
If stations are available on the multiplex channel in your area,
the name of the multiplex will be displayed and the rst station
in the multiplex will begin to play.
To select another station:
Press the • SELECT button to select the multiplex.
Press the • ] or [ button.
The name of the station playing will be shown, next to the
position of the station in the multiplex.
To exit manual tuning:
Press the • SELECT button.
The radio will return to tune from the station list.
Sleep Indicator
