Filter
Top Products
1 ï
1
Instruction 3M™ Speedglas™ 9100
Welding Shield
BEFORE WELDING
For your own protection read these instructions carefully before using the
Speedglas 9100 welding shield.
The complete assembly is illustrated in fi gure A:1.
Adjust the welding shield according to your individual requirements to
reach the highest comfort. (see fi gure B:1 - B:4).
Shade number should be chosen according to table on page 250.
The Speedglas 9100 welding shield gives permanent protection (shade 13
equivalent) against harmful UV- and IR-radiation, regardless of whether
the fi lter is in the light or dark state or whether the auto-darkening function
is operational.
Two lithium batteries are used as the power source. (3V CR2032)
WARNING!
When used in accordance with these user instructions, this product is
designed to help protect the wearer‘s eyes and face from harmful radiation
including visible light, ultra-violet radiation (UV), infra-red radiation (IR)
and sparks and spatter resulting from certain arc/gas welding processes
where shade 5, 8, 9-13 is recommended.
Use of this product in any other application such as laser welding/cutting
may result in permanent eye injury and vision loss.
Do not use any welding product without appropriate training.
Use only with original Speedglas brand spare parts such as inner and
outer protection plates according to the part numbers provided in these
instructions. The use of substitute components or modifi cations not
specifi ed in these user instructions might impair protection and may
invalidate claims under the warranty or cause the shield to be non-
compliant with protection classifi cations and approvals.
The Speedglas 9100 welding shield is not designed for heavy duty
overhead welding/cutting operations due to the risk of burns from falling
molten metal.
•
•
•
•
•