Filter
Top Products
Agilent 16440A User’s Guide, Edition 4 7
User's Guide
Installation
Installation
This section describes how to attach the selector to Agilent 16442A test fixture or to
a shielding box, and how to connect it to Agilent 4155/4156.
To Attach the Selector to Test Fixture
You can attach your selector to the 16442A test fixture. You need a standard
screwdriver.
1. Place the selector on your workbench. 2. Place the test fixture on top of the selector.
3. Position a plate on both sides. 4. Attach each plate using the three flathead
screws supplied with the instrument.