American Standard 70145A 11/00 Sander User Manual


 
AMERICAN SANDERS TECHNOLOGY Classic 8 Operator's Manual
Page 5
The following safety decals are mounted on the machine as shown. If these or any other machine decal,
label or plate should become damaged or illegible, install a new decal in its place. Contact your local autho-
rized distributor for new decals.
The following information signals potentially dangerous conditions to the operator and/or equipment. Read
this manual carefully and familiarize yourself with the machine. Know when these conditions can exist.
Locate all safety devices on the machine. Then, take the necessary steps to train the personnel that will be
operating the machine. Report machine damage or faulty operation immediately.
1. Keep hands and clothing clear of rotating parts.
2. Keep hands on controls with the motor running.
3. Do not leave the machine with the motor running.
4. Do not operate the machine with the access door open or the belt guard removed.
5. Always operate the machine with the dust bag in place.
6. Do not remove dust bag with the motor running.
7. Always disconnect the motor pigtail power cord from the handle before servicing the machine.
8. Use caution if motor is removed for transporting (weight 108 lbs). The machine weighs 106 lbs.
(minus the motor).
9. Always operate in a well ventilated area.
10. Always dispose of sanding dust properly.
Machine Safety Statements