Filter
Top Products
Page 6 AMERICAN SANDERS TECHNOLOGY Classic 8 Operator's Manual
Introduction and Machine Specifications
Operating Control Lever
Motor Starter / Protector
Tension Release Lever
Level Adjustment Nut
Sanding Pressure Adjustment
PART NUMBER 07094C
ABRASIVE SIZE 29
1
/2" x 7
7
/8 "
CONTACT WHEEL SPEED 2850 rpm (revolutions per minute)
ABRASIVE SPEED 4300 sfm (surface feet per minute)
DUST FAN SPEED 6800 rpm (revolutions per minute)
DUST FAN FLOW 234 cfm (cubic feet per minute)
MOTOR 4 hp 208-230V 60Hz 16A
LEVELING CONTROL Externally adjustable
OPERATING CONTROL Adjustable lever/grip
MOTOR STARTER/PROTECTOR Magnetic circuit breaker
SANDING PRESSURE ADJUSTMENT Infinitely adjustable
WHEELS Replaceable 3½" O.D.
BEARINGS Radial ball, permanently lubricated
DIMENSIONS 40
1
/2" L x 15" W x 36
3
/4"H
WEIGHT 214 lbs.
CAUTION: Your equipment may be inappropriate on some installations. Some softer woods
used in flooring cannot support the pressure created by hard wheels.
A felt or rubber wheel should be used when these woods are encountered.
See parts list for optional wheels.
Always consult with the flooring manufacturer on the proper installation, prepara-
tion, and finishing of their product. Determine suitability of your equipment in
preparing the product.