Anton/Bauer DUAL 2702 Battery Charger User Manual


 
1
INTRODUCTION
This Anton/Bauer InterActive 2000 PowerCharger represents over 25 years of Anton/Bauer
technology and experience in a totally new portable power system. The technology
advancements of this new combination, charger/camera power supply, delivers the features
and performance of several essential power products in one economical package.
Fully compatible with all current and future Anton/Bauer Logic Series Gold Mount
batteries, the InterActive 2000 system is a totally new modular platform. PowerChargers
deliver all the advancements and proven reliability of InterActive charging, plus the ability
to power a camera from AC mains. Its unique modular design allows economical expansion
to meet future operational needs and technological developments.
Because the PowerCharger is completely software controlled, as new technology batteries
are introduced, the PowerCharger will merely require a new programming chip to charge the
new batteries along side your existing ones.
The unprecedented value and unique features of the InterActive 2000
PowerCharger system has redefined the standard of power for all video operations
- from individual videographers to the largest broadcast operation.
STANDARD FEATURES
Two and Four Position models each with the full complement of InterActive
technologies including: six simultaneous charge termination systems, SSP (Selective
Sequence Programming), balance and rejuvenation mode, Lifesaver Maintenance
mode, Power Loss Memory mode.
Multifunction LCD displays critical battery and charger data automatically.
Regulated DC power supply output for camera operation from AC mains,
eliminating the need for a separate bulky power supply.
Wide range mains input compatibility (90-250 VAC 50-60 Hz) automatically adapts
to any mains source worldwide.
Modular design allows addition of expansion options.
Expanded InterActive communications with DIGITAL batteries, anticipating new
cell technologies.
Serial output port for printer and PC interface.
Slim, ultra-lightweight design for easy portability. A four position PowerCharger fits
easily in a notebook computer carry case.
70 watt power supply.
DISCHARGE and LCD OPTION’s
The Diagnostic/Discharge
module (DDM) features automatic calibration of DIGITAL
batteries. This also allows periodic diagnostic testing of any Logic Series battery. This
optional module is a standard feature of the DUAL 2702 and QUAD 2702. See the “DDM”
section in this manual for further details.
An LCD
is also available, but is a standard feature on DUAL 2702 and QUAD 2702. Each
LCD will display the status of each battery, as well as important PowerCharger operating
indications. See the “LCD Indication” section in this manual for further details.