Filter
Top Products
STANDARD OPERATION
• The Phantom mount communicates Reserve battery backup
status to the attached NEXUS Battery. If the Phantom is
utilizing the Reserve battery to power the camera and light, it
will instruct the attached NEXUS battery to flash it’s number
one ORANGE LED continuously. This gives the end user
positive indication that the attached NEXUS battery can be
replaced without camera or light output interruption.
• Holding the attached NEXUS display button for 3 seconds
commands the Phantom to enable reserve mode. Reserve
mode transfers current pull to the Phantom battery and away
from the attached NEXUS battery.
• If the NEXUS display button has not been pressed the
Phantom battery will automatically enable into reserve mode
if the attached NEXUS battery voltage drops below 12.0VDC.
• If the voltage on the attached NEXUS battery is above
12.0VDC and the display button on the attached NEXUS
battery has not been pressed, the reserve mode will not be
enabled if the attached battery is removed. The camera and
lights will shut off in this scenario.
• If a Phantom battery is installed before the NEXUS battery is
attached, the Phantom battery will enable reserve mode.
10