Filter
Top Products
The Phantom mount is attached between the camera and the NEXUS
mount. Two separate types of screws are required for the NP mount.
These are provided with the NEXUS battery package.
1) Attach the 2 pin wire connector from the phantom mount to the
camera.
2) Attatch NEXUS base mount to camera with 4 screws (NP
mount only).
3) Attach the 2 pin wire connector and the 1 wire communication
connector from the NEXUS battery side of the mount to the
corresponding connectors on the Phantom mount.
4) Fasten the 6 screws (provided with the Phantom) of the NEXUS
mount to the phantom mount as identified below.
• (4) 1-3/4” screws at bottom four positions
• (2) 1-1/2” screws at top positions.
5) TIGHTEN SCREWS UNTIL YOU FEEL RESISTANCE- DO
NOT OVERTIGHTEN.
Attaching the NEXUS V-Phantom Mount
5
NP mount