Filter
Top Products
MGE™ Galaxy™ 300 10-40 kVA 3:3, 10-30 kVA 3:1 - 380/400/415 V Installation4
Battery enclosure with pre-installed batteries
Warning: Remove all cardboard used to protect the batteries during transport. Make
sure that cables and copper bars are separated.
Note: A maximum of two battery enclosures can be connected to the UPS (one XR Battery
enclosure with a circuit breaker plus one enclosure without a circuit breaker) by a batch cable
between the UPS and the circuit breaker in the battery enclosure.
1. Remove the left and right plastic cover from the battery breaker by removing the two screws
fastening each plastic cover.
Front view