Filter
Top Products
4
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
L
-
+
-
+
-
+
R
HDMI OUT
AUDIO OUT
CAT5e/6/7 IN FIRMWARE DC 24V
RS232
MENU
+
-
POWER
LINK
L
-
+
-
+
-
+
R
HDMI OUT
AUDIO OUT
CAT5e/6/7 IN FIRMWARE DC 24V
RS232
MENU
+
-
POWER
LINK
Panel Description
1. HDMI OUT: Connect to display
2. AUDIO OUT: Connect to amplifier (ex. AT-PA100-G2)
3. RS-232: Connect to PC or control system to program RS-232 control then connect to a
display for on / off command control
4. Status LEDs
POWER LED: Illuminates when receiving power
LINK LED: Illuminates when HDBaseT link is functioning properly
5. MENU button: Use to enter, exit, and select within the on-screen display OSD menu
6. Navigation buttons: Navigate through OSD menu or use to set output resolutions
“Menu” and “-” : Set output resolution to 720p@50Hz
“-” and “+” : Factory resets receiver and sets output resolution to 720p@60Hz
Note: Pressing the “+” button while the OSD menu is closed and a VGA source is selected will cause the
video to auto adjust
1. CAT5e/6/7 IN: Connect HDBaseT source here
2. FIRMWARE: Connect to a PC using a mini USB to USB for firmware updating
3. DC 24V: Connect included 24V DC adapter here to power HDVS-RX and compatible transmitters
3 6
2
5
3
41
1
2
Back Panel
Front Panel