Filter
Top Products
16 ©2008 • All rights reserved.
DH44 4 Source, 4 Zone Digital Audio Router
Source Loop Outputs (SOURCE LOOP OUT)
The Source Loop Outputs are used only when adding DH46X Expansion Routers to the DH44
in order to create more than four zones. These connectors carry Audio, and IR information be-
tween the units and allow seamless functionality in all areas of the home with no complicated
cross-wiring, splicing or specialized adapters needed. When adding a DH46X Router, simply
connect Cat-5 Patch Cables (included with the DH46X) from the SOURCE LOOP OUTs of the
DH44 to the SOURCE LOOP INs of the DH46X as shown in Figure 3-4. Complete connections for
expanded systems are described in the section entitled Multi-Chassis Connections.
DH44
DH46X
Cat-5 Ethernet
Patch Cables
Figure 3-4: Source Loop Outputs
D5-NET IN
This connector is reserved for future two-way data sources and communication.
EXPANSION OUT
Connect the Cat-5 Patch Cable included with the DH46X from the DH44’s EXPANSION OUT port
to the DH46X’s EXPANSION IN port as shown. Complete connections for expanded systems are
described in the section entitled Multi-Chassis Connections.
DH44
DH46X
Cat-5
Ethernet
Patch Cable
Figure 3-5: Expansion Outputs