Filter
Top Products
© 2008 • All rights reserved. 23
DH44 4 Source, 4 Zone Digital Audio Router
IR OUT
Connect a standard IR Emitter (ATON AIE2, for example) from the IR OUT port on the front of the
DHSIP to the IR receiver on the front of the audio source (see Figure 3-15). For sources that
have an IR Input port on the back of the unit, use a 3.5mm to 3.5mm mono interconnect cable
instead (see Figure 3-17).
DHSIP Front
AIE2
Talk-Back
Emitter
CD
Figure 3-16: IR OUT to Local Source - IR Emitter
IR IN
DHSIP Front
3.5mm Mono
Interconnect
Cable
Audio
Source
IR Input
Figure 3-17: IR OUT to Audio Source
3.5mm Interconnect Cable