Filter
Top Products
3701 Phone Page 40
15-601083 Issue 01c (03 October 2008)IP Office
6.10 Menu: Security Functions
The security functions are protected by a PIN code (4 digits).
The PIN entry is only necessary when read only is switched on. In the delivery state the PIN is set to 0.0.0.0. For
additional security, **** is displayed when entering the PIN. Numbers which have been entered can be deleted by
pressing . If you have forgotten your PIN, please consult your system administrator.
All entries in this chapter are started by pressing the softkeys:
Menu Security OK Enter PIN OK
Then select:
· Resetting the Telephone
Default setting OK Sure? Yes
All functions with the exception of the phone book, the PIN and system registrations are deleted and reset to the
delivery state.
· Clear Phonebook
Clear Phonebook OK Sure? Yes
This function deletes all entries in the phonebook.
· Changing the PIN
Change PIN OK old PIN OK new PIN OK repeat new PIN OK
For additional security, the new PIN must be entered twice. The numbers of the PIN are displayed as ****.
· Read Only
Read-Only OK
If read only is active ” ”, all features in the menu can be checked. The settings cannot be changed.