Beko WME 7267 S Cordless Sander User Manual


 
EN
18
selectionbutton.Press“Start/Pause/
Cancel” button.
A Youshouldusealowerspinspeed
for delicate laundries.
Temperature selection
Whenever a new programme is
selected, the temperature anticipated
for that programme appears on the
temperatureindicator(2b).
To change the temperature, press
thetemperaturebutton(Figure1-3).
Temperature falls with 10° decrements.
Cold selection is shown with “-” symbol.
When the “Temperature” button is
pressed after coming to the Cold
selection, the maximum temperature of
the programme you have selected will
be displayed.
To decrease the temperature, press the
“Temperature” button again.
90˚C
Normally soiled, white
cottonsandlinens.(Ex.:
coffee table covers,
tablecloths, towels, bed
sheets)
60˚C
Normally soiled, fade proof
colored linens, cottons
or synthetic clothes
(Ex.:shirts,nightgowns,
pajamas)andlightlysoiled
whitelinenclothes(Ex.:
underwear)
40˚C
30°C
Cold
Fordelicateclothes(Ex.:veil
curtains),blendedclothes
including synthetics and
woolens.
Spin Speed selection
Whenever a new programme is
selected, the maximum spin speed of
the selected programme is displayed on
thespinspeedindicator(Figure2-2a).
To decrease the spin speed, press
the “Spin” button (Figure1-1).Spin
speed decreases gradually. Then, rinse
hold and no spin options are shown
respectively.
Rinse hold is shown with “ ” and no
spin is shown with “ ” symbols.
If you do not want to unload your
clothes immediately after the
programme, you may use the rinse hold
function in order to prevent your clothes
become wrinkled in an anhydrous
condition. With this function, your
laundry is kept in the final rinsing water.
If you want to spin your laundry after the
rinseholdfunction:
- Adjust the spin speed.
- PressStart/Pause/CancelButton.
Programmeresumes.Your
machines drains the water and
spins your laundry.
Youcanusenospinfunctioninorderto
drain the water without spinning at the
end of the programme.
e