Filter
Top Products
EN
8
The moulded plug on this appliance
incorporates a 13A fuse. Should the fuse
need to be replaced an ASTA approved
BS1362 fuse of the same rating must
be used. Do not forget to refit the fuse
cover. In the event of losing the fuse
cover, the plug must not be used until a
replacement fuse cover has been fitted.
Colour of the replacement fuse cover
must be the same colour as that visible
on the pin face of the plug. Fuse covers
are available from any good electrical
store.
Important
Fitting a different plug
As the colours of the wires in the
mains lead of this appliance may not
correspond with the coloured markings
identifying the terminals on your plug,
proceedasfollows:
1 Connect the green - yellow or green
(earth)wiretotheterminalinthe
plug marked ‘E’ or with the symbol
f or coloured green and yellow or
green.
2 Connecttheblue(neutral)wireto
the terminal in the plug marked ‘N’
or coloured black.
3 Connectthebrown(live)wiretothe
terminal in the plug marked ‘L’ or
coloured red.
With the alternative plugs a 13A fuse must
be fitted either in the plug or adaptor or in the
main fuse box. If in doubt contact a qualified
electrician.