Beko WME 7267 S Cordless Sander User Manual


  Open as PDF
of 40
 
EN
21
if required, select the auxiliary
functions.
3. Press“Timedelaying”buttons“+”
and“-”(Figure1-6)tosetyour
desired time delay. Time delaying
symbol(Figure2-2h)willflash.
4. Press“Start/Pause/Cancel”button
(Figure1-8).Thenthetimedelay
starts to count down. Time delaying
symbol(Figure2-2h)willlightup.
Startsymbol(Figure2-2j)willlight
up.
The“:”inthemiddleofthedisplayed
time delay will start flashing.
• Morelaundrymaybeloadedor
taken out during the time delay
period. At the end of the time delay
countdown process, time delaying
symbol(Figure2-2h)fadesandthe
washing starts as the programme
duration is displayed.
Changing the delay time
If you want to change the time during
thecountdown:
1. Press“Start/Pause/Cancel”button
(Figure1-8).“:”inthemiddleofthe
screen will stop flashing. Standby
symbol(Figure2-2k)willlightup.
Timedelayingsymbol(Figure2-2h)
willflash.StartSymbol(Figure2-2j)
will fade.
2. Press“Timedelaying”buttons“+”
and“-”(Figure1-6)tosetyour
desired time delay.
3. Press“Start/Pause/Cancel”button.
Timedelayingsymbol(Figure2-2h)
willlightup.Standbysymbol(Figure
2-2k)willfade.Startsymbol(Figure
2-2j)willlightup.
4. The“:”inthemiddleofthedisplayed
time delay will start flashing.
Cancelling the time delay
If you want to cancel the time delay
countdown and start the programme
immediately:
1. Press“Start/Pause/Cancel”button
(Figure1-8).The“:”inthemiddle
of the displayed time delay will stop
flashing.
2. Startsymbol(Figure2-2j)willfade.
Thestandbysymbol(Figure2-2k)
andthetimedelayingsymbol(Figure
2-2h)willflash.
3. Presstimedelayingbutton“-”
(Figure1-6)todecreasethedesired
timedelay.Programmeduration
after 30 minutes shall be displayed.
4. Press“Start/Pause/CancelButton”
to start the programme.
Starting the programme
1. Press“Start/Pause/Cancel”button
(Figure1-8)tostarttheprogramme.
2. Thestartsymbol(Figure2-2j)which
indicates that the programme has
started will light up.
3. The door locks and the door locked
symbol(Figure2-2i)willlightup.
4. Symbol of the relevant step
(prewash,mainwash,rinse,softener
andspin)thattheprogrammehas
startedfromwilllightup(Figure
2-2f).
Progress of programme.
The progress of a running programme is
shown through a number of symbols on
the screen.
• At the beginning of each programme
step, the relevant symbol in the
series of symbols will light up and
thus, at the end of the programme,
all symbols will remain lit up. The
symbol that is lit up at the far right of
the series of symbols indicates the
step that is being carried out.
Prewash
When“Prewash”auxiliaryfunctionis
selected, prewash symbol will light up to
indicate the beginning of prewash step.
Main wash
Mainwashsymbolwilllightupto
indicate that the main wash cycle has
started.
Rinse
Rinse symbol lights up at the beginning
of the rinse step.
 previous next