Filter
Top Products
Page 9
724-746-5500 | blackbox.com
Chapter 3: Operation
3.2 AC Operation
If you will use the power meter at one location, for example, in a laboratory or
test department, you can use the AC adapter to power it instead of batteries.
Plug the AC adapter’s output cable into the DC input jack on the bottom of the
power meter. When the AC adapter is plugged in, the AC indicator on the LCD
will be displayed. See Figure 3-3.
Figure 3-3. AC adapter indicator.
NOTES: Power is supplied by the AC adapter even if a battery is installed. The
battery indicator does not display on the screen when AC adapter is
plugged in.
Make sure that the AC adapter’s operating voltage is within the range of
the local AC voltage. For example, input: AC 100–240 V, 50–60 Hz.