Black & Decker 385932-02 Drill User Manual


 
2
CAUTION: Wear appropriate hearing protection during use.
Under some conditions and duration of use, noise from this product
may contribute to hearing loss.
WARNING: Some dust created by power sanding, sawing, grinding,
drilling, and other construction activities contains chemicals known to
cause cancer, birth defects or other reproductive harm. Some
examples of these chemicals are:
lead from lead-based paints,
crystalline silica from bricks and cement and other masonry
products, and
arsenic and chromium from chemically-treated lumber (CCA).
Your risk from these exposures varies, depending on how often you do
this type of work. To reduce your exposure to these chemicals: work in
a well ventilated area, and work with approved safety equipment, such
as those dust masks that are specially designed to filter out
microscopic particles.
Avoid prolonged contact with dust from power sanding,
sawing, grinding, drilling, and other construction activities.
Wear protective clothing and wash exposed areas with soap
and water. Allowing dust to get into your mouth, eyes, or lay on the
skin may promote absorption of harmful chemicals.
The label on your tool may include the following symbols.
V ..................................volts
A ................................amperes
Hz ................................ hertz
W.................................. watts
min................................ minutes
................................ alternating current
.............................. direct current
n
o ................................ no load speed
................................ Class II Construction
…/min .......................... revolutions or reciprocation per minute
................................ earthing terminals
................................ safety alert symbol
English
FIG. 1
A
FIG. 2
REVERSING
LEVER
(Shown in Forward
Position)
FIG. 3
SWITCH
ASSEMBLY
220 VOLT PLUG
LOCK-OUT KEY
385932-02/NStar220 Drills.rev 7/2/02 3:49 PM Page 2