Black & Decker BDPS200 Paint Sprayer User Manual


 
Unscrew the lid from the side of the canister and properly dispose of cleaning solution.
Refill the canister with a small amount of new cleaning solution (figure K1). Screw lid securely on canister.
Plug in the cord and spray the cleaning
solution through the sprayer onto scrap
material for 5 seconds (figure K2).
Unplug the sprayer from the power source.
Properly dispose of cleaning solution.
Remove the spray nozzle, by turning
counterclockwise, then remove the atomizer
(figure K3). Refer to figures C & C1.
Unscrew the canister from the sprayer by
turning the collar as shown in figure K4.
Remove the pickup tube and filter and o-ring
from the sprayer. Clean the parts with the
cleaning brush in the appropriate cleaning
solution.
Remove the front housing of the sprayer, by
pressing down on the release button and
pulling the front housing off of the sprayer
(figure K5, K6).
Remove the piston and spring (figure K7).
11
K2
K3
K4
K5
K6 K7