Filter
Top Products
-21-
DELUXE ROUTER GUIDE
(Not included, available as accessory)
The Bosch deluxe router guide is an optional
accessory that will guide the router parallel to
a straight edge or allow you to create circles
and arcs.
The deluxe router guide is supplied with two
rods and screws to fasten the guide (Fig. 27).
In addition, it features a fine adjustment knob
and indicator for accurately positioning the
edge guide relative to the bit. With the guide
installed and adjusted, the router should be
fed normally, keeping the guide in contact
with the edge of the workpiece at all times.
The deluxe router guide may also be
positioned directly under the router base for
operations where a cut is needed close to or
at the edge of the work.
The deluxe router guide includes a dust
extraction hood and the VAC002 vacuum
hose adapter.
For complete instructions on installation and
operation, please refer to the instructions
which are included with this accessory.
FIG. 27
DESIRED
WIDTH
CUT
BASE
WORKPIECE
ROUTER
GUIDE
RODS
M6 WING
SCREW
M6 WING SCREW
FINE
ADJUSTMENT
KNOB
FINE
ADJUSTMENT
INDICATOR
FEED
DIRECTION
USE IN ROUTER TABLE
Your router can also be used in a router table.
The RA1161 fixed base is designed to allow
easy depth adjustment in a table. The RA1162
"D" D-Handle base will not fit in most router
tables.
The RA1166 Plunge Base is
not recommended for use
in a router table.
Damage to plunge router
base may occur.
To eliminate the hassle of installing your
router’s own base on the router table and later
having to convert it back for non-table use,
Bosch offers the optional RA1165 Undertable
Router Base (Fig. 28). The RA1165 base is
designed to be permanently attached your
router table, leaving your other router bases
ready for non-table use. The motor can be
quickly moved from base to base — without
any tools!
!
CAUTION
Shown after
subbase has
been removed
Hole for Hex
Wrench
Quick-release
clamp lever
and depth
adjustment
controls should
face the front of the router table
Mounting
Plate
10-24 Screw
FIG. 28
Hex
Wrench
BM 2610925542 07-06.qxp 7/24/06 12:06 PM Page 21