Filter
Top Products
-4-
/ $,(97,9:65(3796;,*;0=,,8<074,5;
,7,5+05.65(7730*(;065<:,-(*,
:/0,3+:(-,;@.6..3,:69:(-,;@.3(::,:
:(7796790(;,>,(9+<:;4(:2/,(905.
796;,*;69:.36=,:(5+>692:/67(7965
*(7()3,6-:;67705.:4(33()9(:0=,69
>69270,*,-9(.4,5;:The eye protection
must be capable of stopping flying debris
generated by various operations. The dust
mask or respirator must be capable of
filtrating particles generated by your
operation. Prolonged exposure to high
intensity noise may cause hearing loss.
0 ,,7)@:;(5+,9:(:(-,+0:;(5*,(>(@
-964>692(9,(5@65,,5;,905.;/,
>692(9,(4<:;>,(97,9:65(3796;,*;0=,
,8<074,5;Fragments of workpiece or of a
broken accessory may fly away and cause
injury beyond immediate area of operation.
1 63+76>,9;663)@05:<3(;,+.907705.
:<9-(*,:653@>/,57,9-69405.(5
67,9(;065>/,9,;/,*<;;05.(**,::69@
4(@*65;(*;/0++,5>0905.690;:6>5
*69+Cutting accessory contacting a “live”
wire may make exposed metal parts of the
power tool “live” and shock the operator.
2 6:0;065;/,*69+*3,(96-;/,:705505.
(**,::69@If you lose control, the cord may
be cut or snagged and your hand or arm
may be pulled into the spinning accessory.
3 ,=,93(@;/,76>,9;663+6>5<5;03;/,
(**,::69@/(:*64,;6(*6473,;,:;67
The spinning accessory may grab the
surface and pull the power tool out of your
control.
4656;9<5;/,76>,9;663>/03,*(99@05.
0;(;@6<9:0+,Accidental contact with the
spinning accessory could snag your
clothing, pulling the accessory into your
body.
5 ,.<3(93@*3,(5;/,76>,9;663D:(09
=,5;:The motor’s fan will draw the dust
inside the housing and excessive
accumulation of powdered metal may cause
electrical hazards.
6 656;67,9(;,;/,76>,9;6635,(9
-3(44()3,4(;,90(3:Sparks could ignite
these materials.
7 656;<:,(**,::690,:;/(;9,8<09,
308<0+*663(5;:Using water or other liquid
coolants may result in electrocution or
shock.
0*2)(*2(5+,3(;,+$(9505.:
Kickback is a sudden reaction to a pinched or
snagged rotating wheel, backing pad, brush or
any other accessory. Pinching or snagging
causes rapid stalling of the rotating accessory
which in turn causes the uncontrolled power
tool to be forced in the direction opposite of the
accessory’s rotation at the point of the binding.
For example, if an abrasive wheel is snagged
or pinched by the workpiece, the edge of the
wheel that is entering into the pinch point can
dig into the surface of the material causing the
wheel to climb out or kickout. The wheel may
either jump toward or away from the operator,
depending on direction of the wheel’s
movement at the point of pinching. Abrasive
wheels may also break under these conditions.
Kickback is the result of power tool misuse
and/or incorrect operating procedures or
conditions and can be avoided by taking proper
precautions as given below.
( (05;(05(-094.90765;/,76>,9;663
(5+76:0;065@6<9)6+@(5+(94;6(336>
@6<;69,:0:;20*2)(*2-69*,:3>(@:<:,
(<?030(9@ /(5+3, 0- 796=0+,+ -69
4(?04<4 *65;963 6=,9 20*2)(*269
;698<,9,(*;065+<905.:;(9;<7The
operator can control torque reactions or
kickback forces, if proper precautions are
taken.
) ,=,973(*,@6<9/(5+5,(9;/,96;(;05.
(**,::69@Accessory may kickback over
your hand.
* 656;76:0;065@6<9)6+@05;/,(9,(
>/,9,76>,9;663>03346=,0-20*2)(*2
6**<9:Kickback will propel the tool in
direction opposite to the wheel’s movement
at the point of snagging.
+ ":,:7,*0(3*(9,>/,5>69205.*695,9:
:/(97,+.,:,;*=60+)6<5*05.(5+
:5(..05.;/,(**,::69@Corners, sharp
edges or bouncing have a tendency to snag
the rotating accessory and cause loss of
control or kickback.
, 656;(;;(*/(:(>*/(05>66+*(9=05.
)3(+,69;66;/,+:(>)3(+,Such blades
create frequent kickback and loss of control.
(-,;@$(9505.: 7,*0-0*-69905+05.(5+
)9(:0=,<;;05.--7,9(;065:
( ":, 653@ >/,,3 ;@7,: ;/(; (9,
9,*644,5+,+-69@6<976>,9;663(5+
;/,:7,*0-0*.<(9++,:0.5,+-69;/,
:,3,*;,+>/,,3Wheels for which the
BM 2610007691 12-09:BM 2610007691 11-09 12/18/09 11:17 AM Page 4