Filter
Top Products
-5-
power tool was not designed cannot be
adequately guarded and are unsafe.
) !/,.<(9+4<:;),:,*<9,3@(;;(*/,+;6
;/, 76>,9 ;663 (5+ 76:0;065,+ -69
4(?04<4:(-,;@:6;/,3,(:;(46<5;6-
>/,,30:,?76:,+;6>(9+:;/,67,9(;69
The guard helps to protect operator from
broken wheel fragments and accidental
contact with wheel.
* $/,,3: 4<:; ), <:,+ 653@ -69
9,*644,5+,+ (7730*(;065: 69
,?(473,+656;.905+>0;/;/,:0+,6-
*<;6-->/,,3Abrasive cut-off wheels are
intended for peripheral grinding, side forces
applied to these wheels may cause them to
shatter.
+ 3>(@:<:,<5+(4(.,+>/,,3-3(5.,:
;/(;(9,6-*699,*;:0A,(5+:/(7,-69
@6<9:,3,*;,+>/,,3Proper wheel flanges
support the wheel thus reducing the
possibility of wheel breakage. Flanges for
cut-off wheels may be different from grinding
wheel flanges.
, 656;<:,>695+6>5>/,,3:-964
3(9.,976>,9;663:Wheel intended for
larger power tool is not suitable for the
higher speed of a smaller tool and may
burst.
++0;065(3 (-,;@$(9505.: 7,*0-0*-69
)9(:0=,<;;05.--7,9(;065:
656;(;;,47;;6*<;3(9.,:;6*269:/,,;:
6-4,;(3(:;/0:4(*/05,0:56;+,:0.5,+;6
),(+,+0*(;,+*<;6--4(*/05,
( 656;B1(4C;/,*<;6-->/,,369(773@
,?*,::0=,79,::<9,656;(;;,47;;6
4(2, (5 ,?*,::0=, +,7;/ 6- *<;
Overstressing the wheel increases the
loading and susceptibility to twisting or
binding of the wheel in the cut and the
possibility of kickback or wheel breakage.
) 656;76:0;065@6<9)6+@05305,>0;/
(5+),/05+;/,96;(;05.>/,,3When the
wheel, at the point of operation, is moving
away from your body, the possible kickback
may propel the spinning wheel and the
power tool directly at you.
* $/,5 >/,,3 0: )05+05. 69 >/,5
05;,99<7;05.(*<;-69(5@9,(:65:>0;*/
6--;/,76>,9;663(5+/63+;/,76>,9
;66346;0653,::<5;03;/,>/,,3*64,:;6
( *6473,;, :;67 ,=,9 (;;,47; ;6
9,46=,;/,*<;6-->/,,3-964;/,*<;
>/03,;/,>/,,30:0546;0656;/,9>0:,
20*2)(*24(@6**<9Investigate and take
corrective action to eliminate the cause of
wheel binding.
+ 656;9,:;(9;;/,*<;;05.67,9(;06505;/,
>69270,*,,;;/,>/,,39,(*/-<33:7,,+
(5+*(9,-<33@9,,5;,9;/,*<;The wheel
may bind, walk up or kickback if the power
tool is restarted in the workpiece.
, <7769; 7(5,3: 69 (5@ 6=,9:0A,+
>69270,*,;6405040A,;/,90:26->/,,3
705*/05.(5+20*2)(*2Large workpieces
tend to sag under their own weight.
Supports must be placed under the
workpiece near the line of cut and near the
edge of the workpiece on both sides of the
wheel.
- ":, ,?;9( *(<;065 >/,5 4(205. (
B76*2,;*<;C05;6,?0:;05.>(33:696;/,9
)305+(9,(:The protruding wheel may cut
gas or water pipes, electrical wiring or
objects that can cause kickback.
656;<:,;@7,()9(:0=,>/,,3:+,:0.5,+
-69:;9(0./;.905+05.
(-,;@$(9505.: 7,*0-0*-69 (5+05.
7,9(;065:
( 656;<:,,?*,::0=,3@6=,9:0A,+:(5+05.
+0:* 7(7,9 6336> 4(5<-(*;<9,9D:
9,*644,5+(;065: >/,5 :,3,*;05.
:(5+05.7(7,9Larger sanding paper
extending beyond the sanding pad presents
a laceration hazard and may cause
snagging, tearing of the disc or kickback.
(-,;@$(9505.: 7,*0-0*-69$09,9<:/05.
7,9(;065:
( ,(>(9,;/(;>09,)90:;3,:(9,;/96>5)@
;/, )9<:/ ,=,5 +<905. 69+05(9@
67,9(;065656;6=,9:;9,::;/,>09,:
)@(773@05.,?*,::0=,36(+;6;/,)9<:/
The wire bristles can easily penetrate light
clothing and/or skin.
) -;/,<:,6-(.<(9+0:9,*644,5+,+-69
>09, )9<:/05. +6 56; (336> (5@
05;,9-,9,5*,6-;/,>09,>/,,369)9<:/
>0;/;/,.<(9+Wire wheel or brush may
expand in diameter due to work load and
centrifugal forces.
BM 2610007691 12-09:BM 2610007691 11-09 12/18/09 11:17 AM Page 5