Filter
Top Products
-9-
Accessories
If an extension cord is
necessary, a cord with
adequate size conductors that is capable of
carrying the current necessary for your tool
must be used. This will prevent excessive
voltage drop, loss of power or overheating.
Grounded tools must use 3-wire extension
cords that have 3-prong plugs and receptacles.
NOTE: The smaller the gauge number, the
heavier the cord.
RECOMMENDED SIZES OF EXTENSION CORDS
120 VOLT ALTERNATING CURRENT TOOLS
!
WARNING
* Standard cutter blade for 18 to 16 gauge mild steel and
striaght cut #2 608 635 406
* Hex key 1/8" (3mm) #1 907 950 003
** Side blade #2 608 635 410
** Cutter blade for 20 to 24 gauge mild steel and
striaght cut # 2 608 635 407
** Cutter blade for curve cutting # 2 608 635 408
** Cutter blade for 20 gauge stainless steel #2 608 635 409
(*= standard equipment)
(**= optional accessories)
Tool’s
Ampere
Rating
Cord Size in A.W.G.
Wire Sizes in mm
2
3-6
6-8
8-10
10-12
12-16
18 16 16 14 0.75 0.75 1.5 2.5
18 16 14 12 0.75 1.0 2.5 4.0
18 16 14 12 0.75 1.0 2.5 4.0
16 16 14 12 1.0 2.5 4.0 —
14 12 — — — — — —
25 50 100 150 15 30 60 120
Cord Length in Feet Cord Length in Meters
BM 3609929810 11-04 11/15/04 10:40 AM Page 9