Filter
Top Products
-18-
Your router is uniquely suited for use in the
Bosch router table. For detailed instructions
about router table procedures, please refer to the
manual that is supplied with the router table. To
prepare the 1619EVS for table mounting, do the
following:
1. Engage plunge lock override lever as follows:
Facing the rear of the router, move plunge
lock lever approximately 90 degrees
clockwise. Depress small override lever and
slowly release plunge lock lever until override
lever catches firmly on metal housing as
shown in diagram. The motor is now free to
move up and down on the posts (Fig. 22).
2. Engage the plunge return spring defeat
(Fig. 23).
6;, This unique feature makes it easier to
adjust the height of the bit when the router is
mounted under a router table.
a. Move the depth rod to its highest position, and
lock in place with coarse adjustment lock.
b. Remove the collet chuck.
c. Rotate depth stop turret to the position shown
in Fig. 23.
d. Plunge the router motor down as far as it
will go.
e. While holding the motor down, press and hold
down spring defeat button.
f. Allow the motor to move up slightly.
g. Release the button.
The plunge return spring pressure is now
disengaged.
3. Connect the depth rod to the depth stop turret
by rotating the depth stop turret so that the
large end of keyhole slot is aligned with the
lower end of the depth rod. Release coarse
adjust lock, and lower depth rod into the large
end of keyhole slot. Rotate depth stop turret
until the smaller end of the keyhole traps the
end of depth rod (Fig. 24). (To keep the rod in
the keyhole, there is a raised rim around the
underside of the smaller end of the keyhole.
When inverted, the weight of the router keeps
the depth rod inside the raised rim.) 6;,
When the router motor is at its further point
away from the base, the motor must be moved
slightly closer to the base so the depth rod can
clear the raised rim.
9,7(9(;06569":,$0;/6:*/6<;,9!()3,
"
#
"
##
"
&
!
"!!
!
! !
!"!
FIG. 24
FIG. 22
FIG. 23
!"!!
" !!
BM 2610933969 09-12_BM 2610933969 09-12.qxp 9/20/12 9:19 AM Page 18