Filter
Top Products
-5-
$.+48+35</4-:.+(/:,853:.+:552'<5/*
)54:'):=/:.91/4'4*;9+6856+8685:+):/<+
-25<+9=.+4-8'96/4-:.+(/:58'))+9958?
Accessories may be hot after prolonged use.
.+)1:59++:.':1+?9'4*'*0;9:/4-
=8+4).+9'8+8+35<+*,853:.+*8/22(+,58+
9=/:)./4-:.+:552Keys or wrenches
can fly away at high velocity striking you or a
bystander.
545:8;4:.+:552=./2+)'88?/4-/:':?5;8
9/*+A spinning drill bit could become
entangled with clothing and injury may result.
GFCI and personal protection devices like
electrician’s rubber gloves and footwear will
further enhance your personal safety.
545:;9+542?8':+*:5529=/:.'
65=+89;662?While the tool may appear to
work, the electrical components of the AC
rated tool are likely to fail and create a hazard
to the operator.
++6.'4*2+9*8?)2+'4'4*,8++,8535/2
'4*-8+'9+Slippery hands cannot safely
control the power tool.
+<+256'6+8/5*/)3'/4:+4'4)+9).+*;2+
,58?5;8:552$.+4)2+'4/4-':552(+
)'8+,;245::5*/9'99+3(2+'4?658:/545,
:.+ :552 9/4)+ /4:+84'2 =/8+9 3'? (+
3/962')+*586/4).+*589',+:?-;'8*8+:;84
968/4-9 3'? (+ /36856+82? 35;4:+*
Certain cleaning agents such as gasoline,
carbon tetrachloride, ammonia, etc. may
damage plastic parts.
49;8+:.+9=/:)./9/4:.+5,,659/:/54
(+,58+/49+8:/4-('::+8?6')1 Inserting the
battery pack into power tools that have the
switch on invites accidents.
53+ *;9: )8+':+* (?
65=+8 9'4*/4-9'=/4-
-8/4*/4-*8/22/4-'4*5:.+8)549:8;):/54
'):/</:/+9)54:'/49).+3/)'29145=4:5
)';9+ )'4)+8 (/8:. *+,+):9 58 5:.+8
8+685*;):/<+.'83 53++>'362+95,
:.+9+).+3/)'29'8+
• Lead from lead-based paints,
• Crystalline silica from bricks and cement and
other masonry products, and
• Arsenic and chromium from chemically-
treated lumber.
Your risk from these exposures varies,
depending on how often you do this type of
work. To reduce your exposure to these
chemicals: work in a well ventilated area, and
work with approved safety equipment, such as
those dust masks that are specially designed
to filter out microscopic particles.
**/:/54'2 ',+:?$'84/4-9
!
WARNING
BM 2610032211 09-13_BM 2610032211 09-13.qxp 9/26/13 8:55 AM Page 5