Filter
Top Products
-5-
Read all instructions.
Failure to follow all
instructions listed below may result in
hazardous radiation exposure, electric
shock, fire and/or serious injury. The term
“tool” in all of the warnings listed below
refers to your battery-operated (cordless)
tool.
The following labels are on your laser
tool for your convenience and safety. They indicate where the laser light is emitted
by the tool. ALWAYS BE AWARE of their location when using the tool.
DO NOT direct the laser beam at persons or animals and do not stare into the
laser beam yourself. This tool produces laser class 2 laser radiation and complies
with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser
Notice No. 50, dated June 24, 2007. This can lead to persons being
blinded.
DO NOT remove or deface any warning or caution labels. Removing
labels increases the risk of exposure to laser radiation.
Use of controls or adjustments or performance of procedures other
than those specified in this manual, may result in hazardous radiation exposure.
ALWAYS make sure that any bystanders in the vicinity of use are made aware of
the dangers of looking directly into the laser tool.
DO NOT place the laser tool in a position that may cause anyone to stare into the
laser beam intentionally or unintentionally. Serious eye injury could result.
ALWAYS position the laser tool securely. Damage to the laser tool and/or serious
injury to the user could result if the laser tool falls.
ALWAYS use only the accessories that are recommended by the manufacturer of
your laser tool. Use of accessories that have been designed for use with other laser
tools could result in serious injury or unsatisfactory performance.
DO NOT use this laser tool for any purpose other than those outlined in this
manual. This could result in serious injury or unsatisfactory performance.
DO NOT leave the laser tool “ON” unattended in any operating mode.
DO NOT disassemble the laser tool. There are no user serviceable parts inside. Do
not modify the product in any way. Modifying the laser tool may result in hazardous
laser radiation exposure.
General Safety Rules
IEC 60825-1:2007-03
<
1 mW, 635 nm
!
WARNING
Work area safety
Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
DO NOT operate the laser tool around
children or allow children to operate
the laser tool. Serious eye injury could
result.
DO NOT use measuring tools,
attachments and accessories outdoors
when lightening conditions are present.
Electrical safety
Batteries can explode or leak, cause
injury or fire. To reduce this risk,
always follow all instructions and
warnings on the battery label and
package.
Remove the batteries from the tool
when not using it for extended periods.
When storing for extended periods, the
batteries can corrode and discharge
themselves.
DO NOT short any battery terminals.
DO NOT charge alkaline batteries.
DO NOT mix old and new batteries.
GCL 25 Manual with translations.indd 5 4/24/12 8:29 AM