Filter
Top Products
-13-
Plug charger cord into your standard power
o
utlet, then insert battery pack into charger
(
Fig. 3).
The charger’s green indicator light will begin to
“BLINK”. This indicates that the battery is
receiving a fast charge. Fast-charging will
automatically stop when the battery pack is
fully charged.
When the indicator light stops “BLINKING”
(and becomes a steady green light) fast
charging is complete.
The battery pack may be used even though
the light may still be blinking. The light may
require more time to stop blinking depending
on temperature. When you begin the
charging process of the battery pack, a
s
teady red light could also mean the battery
p
ack is too hot or too cold.
The purpose of the green light is to indicate
that the battery pack is fast-charging. It does
n
ot indicate the exact point of full charge.
The light will stop blinking in less time if the
battery pack was not completely discharged.
When charging several batteries in sequence,
the charge time may slightly increase.
When the battery pack is fully charged,
unplug the charger (unless you're charging
another battery pack) and slip the battery
pack back into the tool.
CHARGING BATTERY PACK (BC430 30 MINUTE CHARGER)
BATTERY
PACK
CHARGER
RED LIGHT
GREEN LIGHT
FIG. 3
BM 2609140575 07-08 7/8/08 3:54 PM Page 13