Filter
Top Products
194
Boschtools.com
Toll Free: 877-BOSCH-99
Self-feed Bits
Use Bosch self-feed bits to bore holes for running conduit and
pipe in wood. Can use with portable drills or stationary boring
machines. Each bit features a 1/2" shank with three flat and
double-ended, replaceable screw points.
• Includes replaceable double-ended lead screw points and
1/8" hex key
• Sizes 3-5/8" and 4-5/8" feature double cutter blades
(chip-lifters) and replaceable shanks
Brad Point Bits
Brad point drill bits are designed to drill
smooth, clean cuts in wood. The brad
point tip provides easy positioning and
accurate starts. Extra-wide flutes yield
fast chip removal.
• Designed for use in portable drills and
drill presses
Item # Diameter
SF1001 1"
SF1121 1-1/8"
SF1251 1-1/4"
SF1371 1-3/8"
SF1501 1-1/2"
SF1751 1-3/4"
SF2001 2"
SF2121 2-1/8"
SF2251 2-1/4"
SF2561 2-9/16"
SF3001 3"
SF3621 3-5/8"
SF4621 4-5/8"
Item # Diameter
Shank
Diameter
Overall
Length
Flute
Length
B14601 1/8" 1/8" 2-3/4" 1-5/8"
B14602 3/16" 3/16" 3-1/2" 2-5/16"
B14603 1/4" 1/4" 3-5/16" 2-1/4"
B14604 5/16" 5/16" 4-7/16" 2-3/4"
B14605 3/8" 5/16" 5-3/16" 3-1/4"
B14606 7/16" 5/16" 5-9/16" 3-1/2"
B14607 1/2" 5/16" 5-15/16" 3-1/2"
B14609 5/8" 3/8" 7" 4-1/4"
B14615
1/4", 5/16", 3/8",
7/16", 1/2", 5/8"
Various Various Various
Forstner Bits
Forstner bits bore perfectly smooth, flat-
bottomed holes in wood. Holes are precise,
flat and splinter-free even in end grain and
knots. Ideal for drilling decorative holes used
in fine woodworking and especially well-suited
for severe angles and overlapping holes. Bosch
forstner bits are fashioned from a chrome steel
alloy with a 3/8" shank and are suitable for precision
drilling with portable drills or stationary machines.
• Item B700 is a 7 piece set in a wood case that
includes bit sizes 1/4", 3/8", 1/2", 5/8", 3/4", 7/8" and 1"
• Item FB1600 is a 16 piece set in a wood case that includes
all available bit sizes
Item # Diameter
FB004 1/4"
FB006 3/8"
FB008 1/2"
FB010 5/8"
FB012 3/4"
FB014 7/8"
FB016 1"
FB018 1-1/8"
FB020 1-1/4"
FB022 1-3/8"
FB024 1-1/2"
FB026 1-5/8"
FB028 1-3/4"
FB030 1-7/8"
FB032 2"
FB034 2-1/8"
FB1600 1 Each, All Above Sizes
FB700 1/4", 3/8", 1/2", 5/8", 3/4", 7/8", 1"
Hinge Boring Bits
Carbide-tipped boring bits for European type hinges feature a centering point,
two outside scoring teeth and two straight cutting teeth. Carbide-tipped twist
hinge boring bits feature a centering point and outside scoring tips and utilize
a 10 mm shank with a locking flat and adjustable top screw for automatic and
semi-automatic boring machines.
• NOT for use with three-jaw chucks
Item # Diameter Description
T15005 5 mm Right twist
T15015 5 mm Left twist
T15008 8 mm Right twist
T15018 8 mm Left twist
T15010 10 mm Right twist
T15110 10 mm Left twist
T15215 15 mm For European type hinges
T15020 20 mm For European type hinges
T15025 25 mm For European type hinges
T15026 26 mm For European type hinges
T15126 26 mm For European type hinges
T15030 30 mm For European type hinges
T15035 35 mm For European type hinges
T15138 38 mm For European type hinges
T15040 40 mm For European type hinges
Wood Drilling
Bell Hanger / Installer Bits
The Bosch line of Bell Hanger / Installer bits is designed with the installer
and low-volt electrician in mind.
These unique bits feature a hole in the flute that allows the user to
insert a wire through the bit and tie-off a wire or cable. By pulling
the bit with the attached cable back through the hole, an installer
can fish cables through walls, floors, studs and joists with ease.
Made of High Speed Steel, these bits are the contractor's
choice for drilling through deep wood applications. The
118° point ensures fast, accurate starts and the flutes
are coated in black oxide for quick chip removal.
These Bosch bits feature a 3-flat shank which
eliminates spinning in the chuck.
Item # Bulk Item # Diameter
Overall
Length
Item
Quantity
Bulk
Quantity
BH1001 BH1001B 1/4" 12" 1 6
BH1002 BH1002B 5/16" 12" 1 6
BH1003 BH1003B 3/8" 12" 1 6
BH1005 BH1005B 1/2" 12" 1 6
BH2001 BH2001B 1/4" 18" 1 6
BH2002 BH2002B 5/16" 18" 1 6
BH2003 BH2003B 3/8" 18" 1 6
BH2005 BH2005B 1/2" 18" 1 6
BH3001 BH3001B 1/4" 24" 1 6
BH3002 BH3002B 5/16" 24" 1 6
BH3003 BH3003B 3/8" 24" 1 6
BH3005 BH3005B 1/2" 24" 1 6