Filter
Top Products
191
Toll Free: 877-BOSCH-99
Boschtools.com
Item # Description
SB5003 3 pc. RapidFeed™ spade bit set
SB5005 6 pc. RapidFeed™ spade bit set with extension
SB5006 6 pc. RapidFeed™ spade bit set
SB5006P 6 pc. RapidFeed™ spade bit set in pouch
SB5013P 13 pc. RapidFeed™ spade bit set in pouch
Item # Diameter Overall Length Quantity
SB1001 1/4" 6" 1
SB1002 5/16" 6" 1
SB1003 3/8" 6" 1
SB1004 7/16" 6" 1
SB1005 1/2" 6" 1
SB1006 9/16" 6" 1
SB1007 5/8" 6" 1
SB1008 11/16" 6" 1
SB1009 3/4" 6" 1
SB1010 13/16" 6" 1
SB1011 7/8" 6" 1
SB1012 15/16" 6" 1
SB1013 1" 6" 1
SB1015 1-1/8" 6" 1
SB1017 1-1/4" 6" 1
SB1019 1-3/8" 6" 1
SB1021 1-1/2" 6" 1
LSB1003 3/8" 16" 1
LSB1005 1/2" 16" 1
LSB1007 5/8" 16" 1
LSB1009 3/4" 16" 1
LSB1011 7/8" 16" 1
LSB1013 1" 16" 1
SBE1006 N/A 6" extension 1
SBE1012 N/A 12" extension 1
BOSCH RapidFeed™ Spade Bits
Efficient
Patented
RapidFeed™ Tip
Cutting Spurs
Cut 3X faster than standard spade bits.
Pulls the bit through the wood and reduces the pressure
necessary to drill a hole.
Score outside of hole, reducing splintering and leaving
a smooth hole.
RapidFeed™ Tip
Threaded tip pulls the bit through
the wood and reduces the pressure
necessary to drill a hole.
Cutting Spurs
Scores the outside of the hole
which reduces splintering and
leaves a smooth hole.
Aggressive Cutting Edges
For a fast, clean cut.
1/4" Hex Shank
Will not spin in drill chuck.
Power Groove
For use in all quick
change adapters.
RapidFeed™ Spade Bit Sets
Bosch RapidFeed™ spade bits cut 3X faster than standard spade bits thanks
to the innovative RapidFeed™ tip. This tip is threaded like a wood screw and
literally pulls the bit through the wood for fast cutting action. The pulling action
of the RapidFeed™ tip means less pressure is required behind the bit making
overhead applications easy on the arms.
• Aggressive cutting edges are specially designed with an increased angle to
cut at the rapid speed the bit is being pulled through the wood resulting in a
clean, fast cut
• Cutting spurs on the edge of the bit score the outer edge of the hole before
the cutting edge removes the material. The result is a cleaner, smoother hole
with reduced splintering and less breakout at the back of the material
• Great for plumbers, electricians and HVAC contractors. Use in materials
including hardwoods, composites, treated lumber, railroad ties and other
wood products
• All 6" spade bits have 1/4" hex shank
NOTE: Drill bits (or extension + drill bit) in excess of 8" should never exceed 600 RPM.
SB5005
RapidFeed™ Spade Bits
Item # Diameter Overall Length Quantity
SBS1003 3/8" 4" 1
SBS1005 1/2" 4" 1
SBS1007 5/8" 4" 1
SBS1009 3/4" 4" 1
SBS1011 7/8" 4" 1
SBS1013 1" 4" 1
SBS1015 1-1/8" 4" 1
SBS1017 1-1/4" 4" 1
SBS1021 1-1/2" 4" 1
SBS5003 1/2", 3/4", 1" 4" 3
Stubby Spade Bits
Wood Drilling