Filter
Top Products
196
Boschtools.com
Toll Free: 877-BOSCH-99
NOTE: Drill bits (or extension + drill bit) in excess of 8" should never exceed 600 RPM.
TI18
TI4029
Item # # of Pieces Description
TI10 10 10 pc. set in blow-molded plastic case
TI4013 13
Fractional jobber length 1/16" to 1/4" by
64ths metal index
TI15 15 15 pc. set in blow-molded plastic case
TI18 18 18 pc. set in blow-molded plastic case
TI4029 29
Fractional jobber length 1/16" to 1/2" by
64ths metal index
Titanium Coated Drill Bits
Item # Diameter
Overall
Length
Shank
Diameter Quantity
Carded Items
TI2131 1/16" 1-7/8" 1/16" 2
TI2132 5/64" 2" 5/64" 2
TI2133 3/32" 2-1/4" 3/32" 2
TI2134 7/64" 2-5/8" 7/64" 2
TI2135 1/8" 2-3/4" 1/8" 2
TI2136 9/64" 2-7/8" 9/64" 1
TI2137 5/32" 3-1/8" 5/32" 1
TI2138 11/64" 3-1/4" 11/64" 1
TI2139 3/16" 3-1/2" 3/16" 1
TI2140 13/64" 3-5/8" 13/64" 1
TI2141 7/32" 3-3/4" 7/32" 1
TI2142 15/64" 13-7/8" 15/64" 1
TI2143 1/4" 4" 1/4" 1
TI2144 17/64" 4-1/8" 17/64" 1
TI2145 9/32" 4-1/4" 9/32" 1
TI2146 19/64" 4-3/8" 19/64" 1
TI2147 5/16" 4-1/2" 5/16" 1
TI2148 21/64" 4-5/8" 21/64" 1
TI2149 11/32" 4-3/4" 11/32" 1
TI2150 23/64" 4-7/8" 23/64" 1
TI2151 3/8" 5" 3/8" 1
TI2152 25/64" 5-1/8" 3/8" 1
TI2153 13/32" 5-1/4" 3/8" 1
TI2154 27/64" 5-3/8" 3/8" 1
TI2155 7/16" 5-1/2" 3/8" 1
TI2156 29/64" 5-5/8" 3/8" 1
TI2157 15/32" 5-3/4" 3/8" 1
TI2158 31/64" 5-7/8" 3/8" 1
TI2159 1/2" 6" 3/8" 1
Bulk Items
TI4131 1/16" 1-7/8" 1/16" 12
TI4132 5/64" 2" 5/64" 12
TI4133 3/32" 2-1/4" 3/32" 12
TI4134 7/64" 2-5/8" 7/64" 12
TI4135 1/8" 2-3/4" 1/8" 12
TI4136 9/64" 2-7/8" 9/64" 12
TI4137 5/32" 3-1/8" 5/32" 12
TI4138 11/64" 3-1/4" 11/64" 12
TI4139 3/16" 3-1/2" 3/16" 12
TI4140 13/64" 3-5/8" 13/64" 12
TI4141 7/32" 3-3/4" 7/32" 12
TI4142 15/64" 3-7/8" 15/64" 12
TI4143 1/4" 4" 1/4" 12
TI4144 17/64" 4-1/8" 17/64" 6
TI4145 9/32" 4-1/4" 9/32" 6
TI4146 19/64" 4-3/8" 19/64" 6
TI4147 5/16" 4-1/2" 5/16" 6
TI4148 21/64" 4-5/8" 21/64" 6
TI4149 11/32" 4-3/4" 11/32" 6
TI4150 23/64" 4-7/8" 23/64" 6
TI4151 3/8" 5" 3/8" 6
TI4152 25/64" 5-1/8" 3/8" 6
TI4153 13/32" 5-1/4" 3/8" 6
TI4154 27/64" 5-3/8" 3/8" 6
TI4155 7/16" 5-1/2" 3/8" 6
TI4156 29/64" 5-5/8" 3/8" 6
TI4157 15/32" 5-3/4" 3/8" 6
TI4158 31/64" 5-7/8" 3/8" 6
TI4159 1/2" 6" 3/8" 6
Metal Drilling
Titanium Coated Drill Bit Sets
Bosch titanium drill bits offer the best durability and speed for general purpose
drilling applications. Best for cutting holes into metal and work equally well in
wood and plastic drilling. Use in steel, copper, aluminum, brass, oak, maple,
MDF, pine, PVC, polycarbonate, acrylic, ABS, nylon, composite materials and
common stainless steel.
• Titanium drill bits last 6X longer than High Speed Steel bits. The durability
comes from the super hard titanium nitride coating. While the hardness of
the titanium coating protects the bits from chipping and cracking, the lubricity
protects from heat build up which is the number one cause of product
failure. Surface hardness in excess of 80 HRC allows for penetration of tough
materials including common stainless steel
• The speed helix design penetrates 3X faster than standard bits. The benefits
include easier drilling, reduced heat, extended drill bit life and extended
cordless battery life
• 135° split point starts on contact with no walking or skating and no center
punch is required