Filter
Top Products
2
SPECIFICATIONS
Blade diameter....................................................................................................................................................355 mm
Hole diameter..................................................................................................................................25 mm and 25.4 mm
Max. Miter angle ................................................................................................................................Left 45° , Right 45°
Max. Cutting capacities (H x W)
No load speed (min
-1
).............................................................................................................................................3,200
Dimensions (L x W x H).....................................................................................................530 mm x 596 mm x 610 mm
Net weight...............................................................................................................................................................34 kg
Safety class............................................................................................................................................................... /II
• Due to our continuing programme of research and development, the specifications herein are subject to change
without notice.
• Note: Specifications may differ from country to country.
SYMBOLS
END201-1
The following show the symbols used for the tool. Be
sure that you understand their meaning before use.
...................Read instruction manual.
...................DOUBLE INSULATION
Intended use
The tool is intended for accurate straight and miter cut-
ting in wood. With appropriate saw blades, aluminum
can also be sawed.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated in accordance with European
Standard and can, therefore, also be used from sockets
without earth wire.
Miter angle
0° 45° (left and right)
122 mm x 152 mm 122 mm x 115 mm