Filter
Top Products
6
Operating Instructions and Parts Manual
Airless Paint Systems
www.chpower.com
Pre-Operation (Cont.)
flow rate or capacity the sprayer can
accommodate. Pump flow rate is
measured in gallons per minute (GPM).
PATTERN WIDTH
Thickness of the paint coat is
determined by spray tip “fan width,”
rate of the spray gun movement, and
distance to surface.
SPRAY TIP SELECTION
Two tips having the same tip size, but
different pattern widths, will deliver
the same amount of paint over a
different area (wider or narrower
strip).
A spray tip with a narrow pattern
width makes it easy to spray in tight
places.
SPRAY TIP REPLACEMENT
During use, especially with latex paint,
high pressure will cause the orifice to
grow larger. This destroys the pattern.
Replace tips before they become
excessively worn. Worn tips waste
paint, cause overspray, make cutting-in
difficult, and decrease sprayer
performance.
Table 1 - Tip Selection Chart
AL2810
Quadraflow
TM
Tip
for painting
(12" from surface)
Fan Width (in.) (mm)
.009 .011 .013 .015 .017 .019 .021 .023 .025 .027 .035
4-6 102-152
6-8 152-203
AL3116 AL3117 AL3119 AL3122 AL3125
8-10 203-254
AL2211 AL2213 AL3126 AL3131
10-12 254-305
AL3118 AL3120 AL2215 AL2217 AL3130 AL3132 AL3135 AL3137
AL3139
12-14 305-356
AL3121 AL3124 AL3127 AL2219 AL2221 AL3136 AL3138
AL3140
14-16 356-406
16
-
18 406
-
457
AL3134
Gun Filter 2 types (part #)
l---------AL086101AJ------l l--------------AL086100AJ---------------l
Lacquer, Varnish
Stain, Sealer
Enamel
Exterior Stain
Vinyl, Acrylic, Latex
Vinyl, Oil Base Alkyd
Latex, Acrylic
Block Filler
Elastomer
Ceiling Hi Build, Mil White
St
ruc
t
ura
l
St
ee
l
Heavy Coatings
Water Flow Rate (gpm)
.12 .18 .24 .31 .38 .47 .57 .67 .77
1.03
1.31
(water @ 2000psi,
138
bar)
(lpm)
.49 .69 .91 1.17 1.47 1.79 2.15 2.54 2.96
3.90
4.98
Paint Flow Rate (gpm)
.10 .15 .21 .27 .33 .40 .49 .58 .66
.88
1.12
(latex paint @ 2000psi, 138
bar/1.36 spec. gr.)
(lpm)
.38 .57 .79 1.02 1.25 1.51 1.85 2.20 2.50
3.33
4.24
(gpm)
.25 .25 .33 .40 .50 .60 .75 .88 1.00
1.25
1.50
(lpm)
1.00 1.00 1.25 1.50 1.90 2.30 2.80 3.30 3.80
4.70
5.70
Orifice Size (inches)
Tip Selection Chart
Consult
y
our paint manufacturer for application recommendation
*pump will support tip worn to next larger size.
.029
.031
Pump Minimum
Output*
Wood Interior
Wood Exterior
Masonry
REMOVE FILTER